Dell 810 All In One Inkjet Printer - Manual (Page 2)

About Your Printer
Understanding the Printer Parts
Setting Up Your Printer
Using the Operator Panel
Loading Paper
You can use the Dell™ All -In-One Printer 810 to do a variety of things. A few important things to note:
l If your printer is connected to a computer, you can use either the printer operator panel or the printer software to create your projects.
l You do need to connect your printer to a computer to scan, print, and fax.
l You do not need to connect your printer to a computer to copy.
Understanding the Printer Parts
Part: Description:
1 Paper support Part that supports loaded paper.
2 Paper guide Guide that helps the paper feed into the printer properly.
3 Top cover Top of printer that holds your document or photo flat while you scan it.
4 Paper exit tray Tray that holds the paper as it exits the printer.
NOTE: To extend the paper exit tray, pull the tray straight out.
5 Printer unit Unit you lift to gain access to the ink cartridge.
6 Ink cartridge
carrier Carrier that holds one color ink cartridge. For more information on your cartridge, see Replacing an Ink Cartridge .
7 Scanner support Part under printer unit that keeps the printer open while you change the ink cartridge.
NOTE: To close the printer for normal operation, lift the printer unit, press the scanner support back, and then lower the printer unit
until it rests on the main body of the printer.
8 USB connector Slot into which you plug the USB cable (sold separately). The other end of the USB cable plugs into your computer.
9 Power connector Slot into which you plug the power cable.