Installing the display-hinge cover, Removing the display assembly – Dell Latitude E7440 (Mid 2013) User Manual
Page 27
Advertising
3.
Remove the screws that secure the display-hinge cover to the computer. Lift the display-hinge cover.
Installing the Display-Hinge Cover
1.
Place the display-hinge cover and tighten the screws to secure the display-hinge cover to the computer.
2.
Install battery.
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a) battery
b) SD card
c) base cover
d) keyboard
e) palmrest
27
Advertising
This manual is related to the following products: