Dell Latitude E7440 (Mid 2013) - Manual (Page 32)

7. Remove the screws that secure the display assembly to the computer and lift the display assembly from the
computer.
Installing the Display Assembly
1. Insert the LVDS and wireless antenna cables through the holes on the base chassis and connect them.
2. Place the display assembly onto the computer.
3. Tighten the screws on both sides to secure the display assembly.
4. Route the antenna and the LVDS cables through the routing channel.
5. Connect the LVDS and camera cable to the computer.
6. Connect the antenna cables to the wireless solution.
7. Install:
a) palmrest assembly
b) keyboard
c) base cover
d) SD card
e) battery
8. Follow the procedures in After Working Inside Your Computer .
32