Optical drive, Removing the optical drive, Replacing the optical drive – Dell Studio 1536 (Mid 2008) User Manual
Page 35: Removing the optical drive interposer
Back to Contents Page
Optical Drive
Dell™ Studio 1535/1536 Service Manual
Removing the Optical Drive
1.
Follow the procedures in
Before You Begin
.
2.
Remove the palm rest (see
Removing the Palm Rest
).
3.
Remove the three screws on the optical drive and take out the optical drive from the bay.
Replacing the Optical Drive
1.
Connect the optical drive connector to the system board.
2.
Replace and tighten the three screws on the optical drive.
3.
Replace the palm rest (see
Replacing the Palm Rest
).
Removing the Optical Drive Interposer
1.
Follow the procedures in
Before You Begin
.
2.
Remove the palm rest (see
Removing the Palm Rest
).
3.
Remove the three screws on the optical drive and take out the optical drive from the bay.
4.
Pull out the optical drive interposer to remove it.
1
optical drive
3
screws (3)