Dell E1910H Monitor - Manual (Page 15)

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the
Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables..
COLOR SETTINGS Use the Color Setting menu to adjust the monitor's color settings.
Back
Press to go back to the main menu.
Input Color Format Allows you to set the video input mode to:
l RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter
l YPbPr: Select this option if your DVD player supports only YPbPr output.
Mode Selection Allows you to set the display mode to:
l Graphics: Select this mode if your monitor is connected to your computer.
l Video: Select this mode if your monitor is connected to a DVD player.
NOTE: Depending upon the Display Mode you select the Preset Modes available for your monitor change.
Preset Mode Allows you to choose from a list of preset color modes.
In the Graphics mode, you can set the color to the following preset values: