Maintenance guidelines, Lcd monitor quality & pixel policy, Caring for your monitor – Dell E1910H Monitor User Manual

Page 8

Advertising
background image

 

 

LCD Monitor Quality & Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed
pixel that appears as an extremely tiny dark or bright discolored spot.When the pixel remains permanently lit, it is known as a “bright dot.” When the pixel
remains black, it is known as a “dark dot.”
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal
and within competitive standards.  For more information, see Dell Support site at: support.dell.com.

Maintenance Guidelines

Caring for Your Monitor

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:

l

To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.

l

Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.  

l

If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.

l

Handle your monitor with care as a darker

-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor.  

l

To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.

  

Back to Contents Page

l

Non-operating

Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F)

Humidity

l

Operating

l

Non-operating

  

10% to 80% (non-condensing)

Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90%(non-condensing)

Altitude

l

Operating

l

Non-operating

 

3,657.6m (12,000 ft) max

12,192m (40,000 ft) max

Thermal dissipation

71.82 BTU/hour (maximum)
64.98 BTU/hour (typical)

CAUTION:

Read and follow the

safety instructions

 before cleaning the monitor. 

CAUTION:

 Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. 

Advertising