Replacing the palm rest, Procedure, Post-requisites – Dell Inspiron 17 (5749, Early 2015) User Manual

Page 43

Advertising
background image

Replacing the Palm Rest

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before Working Inside Your Computer

. After working inside your

computer, follow the instructions in

After Working Inside Your

Computer

. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1

Align the tabs on the palm rest with the slots on the computer base and

snap the palm rest into place.

2 Replace the screws that secure the palm rest to the system board.
3 Slide the touchpad cable and the power-button board cable into the

system-board connectors and press down on the connector latches to

secure the cables.

4 Close the display and turn the computer over.
5 Replace the screws that secure the palm rest to the computer base.

Post-requisites

1

Replace the

keyboard

.

2 Replace the

optical drive

.

3 Follow the procedures from step 3 to step 5 in replacing the

hard drive

.

4 Replace the

base cover

.

5 Replace the

battery

.

43

Advertising