Replacing the i/o board, Procedure, Post-requisites – Dell Inspiron 17 (5749, Early 2015) User Manual
Page 55
Replacing the I/O Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the I/O-board cable into the connector on the I/O board and press
down the latch to secure it.
2 Turn the I/O board over and align the screw holes on the I/O board with
the screw holes on the computer base.
3 Replace the screw that secures the I/O board to the computer base.
Post-requisites
1
Replace the
.
2 Replace the
.
3 Follow the procedures from step 4 to step 5 in replacing the
4 Follow the procedures from step 3 to step 5 in replacing the
5 Replace the
6 Replace the
.
55