Dell XPS 8700 (Mid 2013) - Manual (Page 24)

24 | Removing the Graphics-Card Bracket (optional)
Removing the Graphics-Card Bracket (optional)
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
Remove the computer cover. See "Removing the Computer Cover" on page 15.
Procedure
1 Remove the screws that secure the graphics-card bracket to the chassis.
2 Lift the graphics-card bracket off the chassis.
3 Set the graphics-card bracket aside in a secure location.
1 screws (2) 2 graphics-card bracket
1
2
OM_Book.book Page 24 Saturday, August 16, 2014 1:13 AM