Dell XPS 8700 (Mid 2013) - Manual (Page 34)

34 | Replacing the mSATA Drive
Replacing the mSATA Drive
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the notch on the mSATA drive with the tab on the
system-board connector.
2 Insert the mSATA drive at a 45-degree angle into the
system-board connector.
3 Press the other end of the mSATA drive down and replace the screws that secure
the mSATA drive to the systemboard.
Postrequisites
Replace the computer cover. See "Replacing the Computer Cover" on page 16.
OM_Book.book Page 34 Saturday, August 16, 2014 1:13 AM