Heat sink and processor, Removing the heat sink and processor, 10 heat sink and processor – Dell OptiPlex 790 (Early 2011) User Manual
Page 33
Advertising
10
Heat Sink And Processor
Removing The Heat Sink and Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
3.
Disconnect the heat-sink assembly cable from the system board.
4.
Loosen the captive screws in the order: 1, 2, 3 and 4.
5.
Lift the heat sink assembly upwards, and remove it from the computer. Lay the
assembly with the fan facing downwards, and with the thermal grease facing
upwards.
33
Advertising