Timer chip counter 2 failed, Unexpected interrupt in protected mode, Write fault – Dell OptiPlex 790 (Early 2011) User Manual

Page 88

Advertising
background image

Time-of-day not set-please run the System Setup program

Description The time or date stored in System Setup does not match the computer

clock.

Timer chip counter 2 failed

Description

A chip on the system board may be malfunctioning.

Unexpected interrupt in protected mode

Description The keyboard controller may be malfunctioning or a memory module may

be loose.

WARNING: Dell's Disk Monitoring System has detected that drive

[0/1] on the [primary/secondary] EIDE controller is operating

outside of normal specifications. It is advisable to immediately

back up your data and replace your hard drive by calling your

support desk or Dell.

Description During initial startup, the drive detected possible error conditions. When

your computer finishes booting, immediately back up your data and
replace your hard drive (for installation procedures, see "Adding and
Removing Parts" for your computer type). If no replacement drive is
immediately available and the drive is not the only bootable drive, enter
System Setup and change the appropriate drive setting to None. Then
remove the drive from the computer.

Write fault

Description

The operating system cannot write to the floppy or hard drive.

88

Advertising