Input/output panel, Removing the input/output panel, 15 input/output panel – Dell OptiPlex 790 (Early 2011) User Manual
Page 47
Advertising
15
Input/Output Panel
Removing The Input/Output Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
3.
Remove the
4.
Disconnect the Input/Output panel or the FlyWire cable from the system board.
5.
Remove the screw that secures the Input/Output panel to the chassis.
6.
Slide the Input/Output panel towards the right of the system to release from chassis.
47
Advertising