Dell Inspiron 9200 User Manual
Page 80
80
Adding and Replacing Parts
www
.dell.com | support.dell.com
4
Remove the existing modem:
a
Remove the screw securing the modem to the system board, and set it aside.
b
Pull straight up on the attached pull-tab to lift the modem out of its connector on the
system board, and disconnect the modem cable.
5
Install the replacement modem:
a
Connect the modem cable to the modem.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the
connectors and realign the card.
b
Align the modem with the screw holes and press the modem into the connector on the
system board.
c
Replace the screw that secures the modem to the system board.
6
Replace the modem cover.
modem
system board
connector
pull-tab
screw
modem cable
D5169bk1.book Page 80 Thursday, October 21, 2004 4:37 PM