Dell Inspiron 9200 - Manual (Page 87)

Adding and Replacing Parts
87
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
1 Follow the procedures in "Before You Begin" on page 71.
2 Loosen the two captive screws and remove the Mini PCI card cover.
3 Disconnect the antennae cables from the Mini PCI card.
4 Remove the hinge cover. See page 83.
5 Remove the four screws securing the display.
6 Disconnect the display cable, using the pull-tab.
antenna
cables
D5169bk1.book Page 87 Thursday, October 21, 2004 4:37 PM