Installing the expansion card – Dell OptiPlex 990 (Early 2011) User Manual
Page 16
Advertising
6. Pull the release lever away from the PCIe x4 card (if any) to release the
securing tab from the dent in the card. Then, ease the card up and out of its
connector and remove it from the computer.
Installing The Expansion Card
1. Insert the PCIe x4 card into the connector on the system board and press
down to secure it in place.
2. Insert the PCIe x16 card (if any) into the connector on the system board and
press down to secure it in place.
3. Install the
4. Install the
.
After Working Inside Your Computer
16
Advertising