Heat sink, Removing the heat sink and processor, 10 heat sink – Dell OptiPlex 990 (Early 2011) User Manual

Page 27

Advertising
background image

10

Heat Sink

Removing the Heat Sink and Processor

1. Follow the procedures in

Before Working Inside Your Computer

.

2. Remove the

cover

.

3. Remove the

front bezel

.

4. Remove the

drive cage

.

5. Disconnect the heat-sink assembly cable from the system board.

6. Release the Input/Output Board or the FlyWire cable from the routing

channel on the heat sink.

27

Advertising
See also other documents in the category Dell Computers: