Dell Studio XPS 9100 (Mid 2010) User Manual
Page 3
Advertising
2.
Insert the badge back-light module into the slot on the front bezel.
3.
Press the badge back-light module down until it snaps into place.
4.
Route the badge back-light cable through the securing tabs.
5.
Align the screw holes on the hinge with the screw holes on the front bezel.
6.
Replace the two screws that secure the hinge to the front bezel.
7.
Replace the front bezel (see
Replacing the Front Bezel
).
8.
Replace the computer cover (see
Replacing the Computer Cover
).
Back to Contents Page
Advertising