Dell Studio XPS 9100 (Mid 2010) - Manual (Page 33)

3. Align the screw holes on the power supply with the screw holes on the chassis.
4. Replace the four screws that secure the power supply to the chassis.
5. Connect the DC power cables to the system board and drives (see System Board Components ).
6. Replace the computer cover (see Replacing the Computer Cover ).
7. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
WARNING: Failure to replace and tighten all screws may cause electrical shock as these screws are a key part of the system grounding.