Expresscard cage – Dell Inspiron 9400 User Manual
Page 10
Back to Contents Page
ExpressCard Cage
Dell™ Inspiron™ 9400 Service Manual
1.
Follow the instructions in
Before Working Inside Your Computer
.
2.
Remove the hard drive (see
Removing the Hard Drive
).
3.
Remove the optical drive (see
Optical Drive
).
4.
Remove the hinge cover (see
Removing the Hinge Cover
).
5.
Remove the keyboard (see
Keyboard
).
6.
Remove the display assembly (see
Removing the Display Assembly
).
7.
Remove the palm rest (see
Removing the Palm Rest
).
8.
Disconnect the ExpressCard connector from the system board.
9.
Remove the four M2 x 3-mm screws that attach the ExpressCard cage to the top of the hard drive bay.
Back to Contents Page
CAUTION:
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
1 hard drive bay
2 ExpressCard cage
3 M2 x 3-mm screws (4)
4 ExpressCard connector