Display bezel – Dell Inspiron 9400 User Manual
Page 22
2.
Align the display assembly over the screw holes in the base of the computer.
3.
Replace the four M2.5 x 5-mm screws.
4.
Connect the display cable to the system board.
5.
Reroute the display cable into the cable channel.
6.
Replace the hinge cover (see
Replacing the Hinge Cover
).
7.
If a Mini-Card is installed, connect the antenna cables to the card (see
Mini-Card
). If one is not installed, tuck the antenna cables into their secured
location.
8.
Replace the Mini-Card cover.
Display Bezel
NOTE:
The left hinge assembly has a small tab that you must first insert underneath the edge of the palm rest.
1
tab
NOTE:
When you replace the four screws, ensure that you tighten them in the order indicated by the labels "1," "2," "3," and "4" on the display hinges.