Dell PowerVault MD3000 - Manual (Page 30)

30
Software Installation
your MD3000 arrays. For more information on alerts, the event monitor, and
manually restarting the event monitor, see the MD Storage Manager User’s
Guide
.
10 The Pre-Installation Summary screen appears showing the installation
destination, the required disk space, and the available disk space. If the
installation path is correct, click Install.
11 When the installation completes, click Done.
12 Return to the CD’s main menu and select View RDAC MPP Driver
Installation Instructions.
13 After installation of the RDAC driver is complete, restart the system.
14 Install MD Storage Manager on all other hosts attached to the MD3000
array.
15 Reboot each host attached to the array.
Management Station Installation
Follow these steps to install MD Storage Manager on a system that configures
and manages a storage array over the network.
1 On the CD’s main menu, type
3 and press <Enter>. The installation
wizard appears.
2 Click Next.
3 Accept the terms of the License Agreement and click Next.
4 Select Management Station as the type of installation. This option installs
only the MD Storage Manager software used to configure, manage and
monitor a MD3000 storage array.
5 Click Next.
6 If the Overwrite Warning dialog appears, click OK. The software currently
being installed automatically replaces any existing versions of MD Storage
Manager.
7 A screen appears asking whether to restart the event monitor automatically
or manually after rebooting. You should configure only one system (either
a host or a management station) to automatically restart the event
monitor.