Dell PowerVault MD3000 - Manual (Page 31)

Software Installation
31
NOTE:
The event monitor notifies the administrator of problem conditions
with the storage array. MD Storage Manager can be installed on more than
one system, but running the event monitor on multiple systems can cause
multiple alert notifications to be sent for the same error condition. To avoid
this issue, enable the event monitor only on a single system which monitors
your MD3000 arrays. For more information on alerts, the event monitor, and
manually restarting the event monitor, see the MD Storage Manager User’s
Guide
.
8 The Pre-Installation Summary screen appears, showing the installation
destination, the required disk space, and the available disk space. If the
installation path is correct, click Install.
9 When the installation completes, click Done.
A screen appears asking if you want to restart the system now.
10 Restart the system.
11 Set the path for the command line interface (CLI), if required. See the MD
Storage Manager CLI Guide for more information.
Documentation for Windows Systems
Viewing Resource CD Contents
1 Insert the CD. If autorun is disabled, navigate to the CD and double-click
setup.exe.
NOTE:
On a server running Windows Server 2008 Core version, navigate to the CD
and run the setup.bat utility. Installing and viewing documentation other than the
MD3000 Readme is not supported on Windows Server 2008 Core version.
A screen appears showing the following items:
a View MD3000 Readme
b Install SAS 5/E Adapter Driver
c Install MD3000 Storage Software
d Install MD3000 Documentation
2 To view the readme.txt file, click the first bar.
The readme.txt file appears in a separate window.
3 Close the window after viewing the file to return to the menu screen.