Solving problems, Beep codes, Inspiron – Dell Inspiron 15 (M5010, Early 2010) User Manual

Page 49

Advertising
background image

47

This section provides troubleshooting

information for your computer. If you cannot

solve your problem using the following

guidelines, see “Using Support Tools” on

page 53 or “Contacting Dell” on page 76.

WARNING: Only trained service
personnel should remove the computer
cover. See the

Service Manual at

support.dell.com/manuals for advanced
service instructions.

Beep Codes

Your computer might emit a series of beeps

during start‑up if there are errors or problems.

This series of beeps, called a beep code,

identifies a problem. Write down the beep

code and contact Dell (see “Contacting Dell”

on page 76).

NOTE: To replace parts, see the

Service

Manual at support.dell.com.

Beep Code Possible Problem
One

Possible system board failure —

BIOS ROM checksum failure

Two

No RAM detected
NOTE: If you installed or

replaced the memory module,

ensure that the memory module

is seated properly.

Three

Possible system board failure —

Chipset error

Four

RAM read/write failure

Five

Real Time Clock failure

Six

Video card or chip failure

Seven

Processor failure

Eight

Display failure

Solving Problems

INSPIRON

Advertising