Dell Inspiron 3700 - Manual (Page 85)

support.dell.com System Software Solutions 4-7
   0
6 0 8   9
To install the advanced port replicator (APR), perform the following steps:
1. If the computer has never been turned on, turn it on now while it is undocked and
complete the operating system setup. Then go to step 2.
If you have completed the operating system setup, turn on the computer, and
then go to step 2.
For setup instructions, see the Dell Inspiron Systems Setup Guide that came with
the computer.
2. Dock the computer.
For instructions, see your Advanced Port Replicator User’s Guide.
The operating system creates a hardware profile for the APR.
3. To load the appropriate drivers for use with the APR, follow the instructions on
the display. When prompted, restart the computer.
4. Install the appropriate drivers to use with a network interface controller (NIC) in
the APR.
   #%& 0500

8   9
The DVD decoder driver allows you to play DVD movies on the computer.
NOTE: When you are promoted to select a directory, Dell recommends using the
default directory settings.
1. Insert the Software DVD Decoder CD into the DVD-ROM drive.
2. Click the Start button, and then click Run.
3. In the Run dialog box, type x:\setup.exe , where x is the DVD-ROM drive
letter.
The DVD-ROM drive letter is usually D.
4. Click OK.
5. The Welcome window appears. Click Next>.
6. At the Choose Destination Location screen, click Next>.
7. At the Select Program Folder screen, click Next>.
8. At the Start Copying Files screen, click Next>.
9. At the Setup Complete screen, be sure that the Yes, I want to restart my
computer now radio button is selected, and then click Finish.
The first time you play a DVD after installing this driver, you may be prompted to
change the region setting.