Dell 1320c Network Color Laser Printer User Manual
Page 134
Before you start remote installation, perform the following procedures.
Allow Print Spooler to Accept Client Connections
1.
Click Start® Run.
For Windows Server 2003/Windows Server 2008: Click Start® Run.
For Windows Vista: Click Start® All Programs® Accessories® Run.
2.
Type gpedit.msc, and then click OK.
3.
Click Continue. (for Windows Vista only)
4.
Click Computer Configuration® Administrative Templates® Printers.
5.
Right-click Allow Print Spooler to accept client connections and select Properties.
6.
From the Setting tab, select Enabled, and then click OK.
7.
Restart the computer.
Share the Firewall File and Printer
For Windows Vista:
1.
Click Start® Control Panel.
2.
Select Security.
3.
Click Windows Firewall.
4.
Click Change settings.
5.
Click Continue.
6.
From the Exceptions tab, check the File and Printer Sharing check box, and then click OK.
For Windows XP:
1.
Click Start® Control Panel.
2.
Select Security Center.
3.
Click Windows Firewall.
4.
From the Exceptions tab, check the File and Printer Sharing check box, and then click OK.
For Windows Server 2008:
1.
Click Start® Control Panel.
2.
Double-click Windows Firewall.
3.
Click Change settings.
4.
From the Exceptions tab, check the File and Printer Sharing check box, and then click OK.
Start Remote Registry
For Windows Vista:
1.
Click Start® Control Panel.
2.
Select System and Maintenance.
3.
Click Administrative Tools.
4.
Double-click Services.
5.
Click Continue.
6.
Right-click Remote Registry and select Start.
7.
Right-click Remote Registry and select Properties.
8.
Change Startup type: to Automatic, and then click OK.
For Windows Server 2008:
NOTE:
This step is required for Windows XP 64-bit Edition, Windows Vista, Windows Vista 64-bit Edition, Windows Server 2003, and Windows Server
2008.
NOTE:
This step is required for Windows XP 32-bit Edition, Windows XP 64-bit Edition, Windows Vista, and Windows Server 2008.
NOTE:
This step is required for Windows Vista or Windows Server 2008.