Printer settings, System settings, Printer maintenance – Dell 1320c Network Color Laser Printer User Manual

Page 26: Paper density

Advertising
background image

Printer Settings

 

The Printer Settings tab includes System Settings page.

 

System Settings

 

Purpose:

 

To configure the basic printer settings.

 

Values:

 

Printer Maintenance

 

The Printer Maintenance tab includes Paper Density, Adjust BTR, Adjust Fuser, Auto Registration Adjustment, Color Registration Adjustments, Adjust
Altitude
, Reset Defaults, Non-Dell Toner, Initialize PrintMeter, and Web Link Customization pages.

 

Paper Density

 

Purpose:

 

To specify the paper density.

 

Values:

 

Job History

Click the Start button to print the job history report.

Error History

Click the Start button to print the error history report.

Color Test Page Click the Start button to print the color test page.

Power Saver Timer
Mode 1

Displays the amount of time before the printer enters the power saver timer mode 1 after it finishes a print job.

Power Saver Timer
Mode 2

Displays the amount of time before the printer enters the power saver timer mode 2 after it finishes a print job.

Control Panel Tone

Displays whether the printer sounds the tone for the panel.

Machine Ready Tone

Displays whether the printer sounds the tone when the machine becomes ready.

Job Complete Tone

Displays whether the printer sounds the tone when a job is completed.

Fault Tone

Displays whether the printer sounds the tone when an error occurs.

Alert Tone

Specifies whether the printer sounds an alarm when an error occurs.

Out of Paper Alert Tone Displays whether the printer sounds the tone when the paper runs out.

Low Toner Alert Tone

Displays whether the printer sounds the tone when the toner is low.

Time-Out

Specifies the amount of time the printer waits to receive additional bytes of data from the computer. When this timeout expires,
the print job is canceled.

Device Language

Determine the language to be used for E-mail Alert.

Auto Log Print

Specifies whether the printer outputs logs automatically.

Plain Light

Sets the paper density in Light for the plain paper.

Normal Sets the paper density in Normal for the plain paper.

Advertising