Dell POWEREDGE M1000E - Manual (Page 14)

4 M5424 SAN I/O Module Hardware Reference Manual
53-1001082-01
Hardware Description
1
Hardware Description
This section describes the physical SAN I/O Module as shipped from the factory. For specifications,
such as installed memory, weight and physical dimensions, facility requirements, architectural
specifications, and regulatory compliance, refer to
Appendix A, “SAN I/O Module specifications”
Port side
Externally accessible ports and LEDs are on the port side of the SAN I/O Module. The port side
faces out when the SAN I/O Module is inserted into the I/O bay of the Blade Server enclosure.
Figure 1 details the port side. For a complete description of the locations and interpretations of
these LEDs, see “Interpreting LED activity” on page 22.
Access the I/O module handle at the front of the port side of the SAN I/O Module. By lifting the
handle’s release latch, you can open the handle to remove and insert the unit from the Blade
Server Enclosure.
FIGURE 1 Port side view
1. Ports with port status and port speed LEDs
2. RJ45 console port
3. SAN I/O Module status LED
4. Power status LED
5. Server management LED
6. SAN I/O Module handle
The nonport (SAN I/O Module status) LEDs, shown as item 3 of Figure 1 , display SAN I/O
Module-level information as shown in Figure 2 .
FIGURE 2 Other status LEDs
1 2 3 4
5 6
1 2 3 4
5 6
1 2
3