Dell POWEREDGE M1000E - Manual (Page 38)

28 M5424 SAN I/O Module Hardware Reference Manual
53-1001082-01
Fibre Channel standards compliance
A
For more information and a list of supported HBAs, refer to your Dell PowerEdge documentation.
Fibre Channel standards compliance
The SAN I/O Module switch meets or exceeds the Fibre Channel standards for compliance,
performance, and feature capabilities as defined in the Brocade standards compliance list. This
information is available at:
http://www.brocade.com/products/interop/standards_compliance.jsp
Regulatory compliance
This section describes the regulatory compliance requirements for the Brocade M5424 Fibre
Channel SAN I/O Module .
FCC warning (US only)
This equipment has been tested and complies with the limits for a Class A computing device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual, might cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at the user’s own
expense.
MIC Statement (Republic of Korea)
VCCI statement (Japan)
This is a Class A product based on the standard of the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). If this equipment is used in a domestic environment,
radio disturbance might arise. When such trouble occurs, the user might be required to take
corrective actions.