Dell 962 All In One Photo Printer - Manual (Page 72)

Paper feed error A paper feed error has occurred. Check the paper paths for
obstructions, and then press the
Power button to reset. For more
information, see
Check for a paper
jam.
Device Not Supported.
Please Disconnect
The attached device is not supported,
or the Pictbridge-enabled digital
camera is not set to the correct USB
mode. Disconnect the device or check the
USB mode setup. Refer to the
documentation that came with your
digital camera for more information.
Communications error
message The printer is not communicating with
the computer. Disconnect and then reconnect
the USB cable.
Disconnect and then reconnect
the printer power cable.
Restart the computer.
Remove and reinstall the printer
software. See
Removing and
Reinstalling Software .
Improving Print Quality
If you are not satisfied with the print quality of your documents, there are several different ways to improve
the print quality.
Use the appropriate paper. For example, use Dell Premium Photo Paper if you are printing photos with
a photo ink cartridge.
Use paper that is a heavier weight, bright white, or coated. Use Dell Premium Photo Paper if you are
printing photos.
Select a higher print quality.
To select a higher print quality:
With your document open, click File Print. 1.
The Print dialog box appears.
From the Print dialog box, click Preferences, Properties, or Options (depending on your program or
operating system). 2.
From the Quality/Speed area, select a higher quality setting. 3.
Print your document again. 4.
If the print quality does not improve, try aligning or cleaning the ink cartridges. For more information
on aligning, see
Aligning Ink Cartridges . For more information on cleaning ink cartridges, see Cleaning
the Ink Cartridge Nozzles .
5.