Wps-pin – Dell C3760n Color Laser Printer User Manual
Page 56
54
Installing Optional Accessories
5 Select Advanced, and then select a connection method from WPS-PBC, WPS-PIN, Operator Panel, Ethernet
Cable, or Dell Printer Configuration Web Tool.
For
Ethernet Cable:
a
Select Ethernet Cable, and then click Next.
Follow the on-screen instructions to configure wireless settings, and then click
Next.
The
Advanced Configuration Tool starts.
b
Select the printer, and then click Next.
Wireless Network Settings screen appears.
NOTE:
If the printer is not listed, click Enter IP Address and enter the IP address of your printer, and then click OK.
c
Set the wireless network settings, and then click Next.
IP Address Settings screen appears.
NOTE:
For details on each item, see "Assigning an IP Address."
d
Set the IP address settings of the printer, and then click Next.
Confirm the settings screen appears.
e
Confirm the settings, and then click Apply.
Complete configuration screen appears.
f
Click Next.
For WPS-PBC, WPS-PIN, Operator Panel, and Dell Printer Configuration Web Tool, follow the on-screen
instructions to configure wireless settings.
To configure wireless settings without using the video instructions, see the following instructions.
WPS-PIN
The PIN code of WPS-PIN can only be configured from the operator panel.
NOTE:
WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices
required for wireless configuration by entering PIN assignments to a printer and computer. This setting, performed through an
access point, is available only when the access points of your wireless router supports WPS.
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
(Set) button.
3 Press the
button until Network is highlighted, and then press the
(Set) button.
4 Press the
button until WPS Setup is highlighted, and then press the
(Set) button.
5 Ensure that PIN Code is highlighted, and then press the
(Set) button.
6 Write down the displayed 8-digit PIN code or select Print PIN Code. The PIN code is printed.
7 Ensure that Start Configuration is highlighted, and then press the
(Set) button.
8 Ensure that the message Please wait WPS Setting is displayed, and enter the PIN code displayed on step
6 into the wireless LAN access point (Registrar).
NOTE:
For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN access
point.
9 When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.