Dell OptiPlex 755 User Manual
Page 70
16.
Exit the MEBx Setup and save the ME configuration. The computer displays an Intel ME Configuration Complete message and then restarts. After the
ME configuration is complete, you can configure the Intel AMT settings.
Intel AMT Configuration: Enabling Intel AMT for SMB Mode
To enable Intel AMT Configuration settings on the target platform, perform the following steps:
1.
Turn on the computer and during the boot process, press <Ctrl><p> when the Dell logo screen appears to enter the MEBx application.
2.
A prompt for the password appears. Enter the new Intel ME password.
3.
Select Intel AMT Configuration. Press <Enter>.
4.
Select Host Name. Press <Enter>.
5.
Then type in a unique name for this Intel AMT machine. Press <Enter>.
Spaces are not accepted in the host name. Make sure there is not a duplicate host name on the network. Host names can be used in place of the
computer's IP for any applications requiring the IP address.