Remove-dr2000v, Purpose, Syntax – Dell PowerVault DR2000v User Manual
Page 18: Parameters, Repair-dr2000v
– Optional parameter. If not specified, the local host name will be used.
•
UserName: Specify user name.
– Optional parameter. If not specified, cmdlet runs in current user context.
•
Password: Specify password.
– Optional parameter. If not specified, cmdlet runs in current user context.
Remove-DR2000v
Purpose
To delete the DR2000v virtual machine.
Syntax
Remove-DR2000v –Name <DR2000v Name> -ComputerName <VMHost Name>] [-UserName
<username> -Password <password>
Parameters
•
Name: Specify the DR2000v name.
•
ComputerName: Specify the Hyper-V server name, hostname, or fully qualified domain name.
– Optional parameter. If not specified, the local host name will be used.
•
UserName: Specify user name.
– Optional parameter. If not specified, cmdlet runs in current user context.
•
Password: Specify password.
– Optional parameter. If not specified, cmdlet runs in current user context.
Repair-DR2000v
Purpose
To restore the DR2000v operating system (OS) to the original firmware level, without impacting stored deduped data.
(This operation is equivalent to using the Restore Manager on a physical DR Series system.)
Syntax
Repair-DR2000v –Name <DR2000v Name> -Image <absolute path to DR2000v Image zip>
[-ComputerName <VMHost Name>] [-UserName <username> -Password <password>]
Parameters
•
Name: Specify the DR2000v name.
•
Image: Specify the UNC path location of the DR2000v base image file.
•
ComputerName: Specify the Hyper-V server name, hostname, or fully qualified domain name.
18