Dell Inspiron 17 (7737, Mid 2013) - Manual (Page 38)

38 | Replacing the USB Board
Replacing the USB Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9. For more
safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Connect the USB-board cable to the USB board and press down the latch to secure
the cable.
2 Adhere the tape over the USB-board cable.
3 Using the alignment posts on the computer base, place the USB board in position.
4 Replace the screw that secures the USB board to the computer base.
Postrequisites
1 Replace the base cover. See "Replacing the Base Cover" on page 29.
2 Replace the keyboard. See "Replacing the Keyboard" on page 26.
3 Replace the hard-drive assembly. See "Replacing the Hard Drive" on page 21.
4 Replace the optical-drive assembly. See "Replacing the Optical Drive" on page 18.
5 Replace the battery. See "Replacing the Battery" on page 12.
book.book Page 38 Friday, August 16, 2013 4:21 PM