Dell Intel PRO Family of Adapters User Manual
Page 30
used by the DHCP server.
Teaming is not supported in
Windows with iSCSI Boot.
Creating a team using the primary and secondary iSCSI adapters and selecting that
team during the Microsoft initiator installation may fail with constant reboots. Do not
select a team for iSCSI Boot, even if it is available for selection during initiator
installation.
For load balancing and failover support, you can use Microsoft Multipath I/O (MPIO)
instead. Refer to the Microsoft iSCSI Software Initiator User Guide for MPIO setup.
Potential system failure may occur
if DHCP re-uses IP addresses after
their lease expires.
If you are using DHCP for the initiator or target IP configuration, potential system
failure may occur if DHCP re-uses those IP addresses after their lease expires. It is
recommended to use static IP or DHCP reserved IP addresses to avoid this.