Dos exit codes, Example 5 – Dell Intel PRO Family of Adapters User Manual
Page 42
BootUtil -NIC=2 -BOOTENABLE=DISABLED
NOTE: This command will work only on an adapter using a combo Option ROM and not a discrete Option ROM.
Example 5:
To get help:
BootUtil -?
DOS Exit Codes
BootUtil returns exit codes to the DOS environment. Possible exit codes are listed below:
Code Name
Value
All BootUtil operations completed successfully
0
Bad command line parameter
1
No supported network adapters detected
2
Invalid network port selected
3
Flash operation failed
4
EEPROM read operation failed
5
EEPROM write operation failed
6
File content is missing or corrupt
7
Operator termination
8
LOM not supported for selected operation
9
Network port is not bootable
10
Programming iSCSI boot configurations failed
13
System memory allocation failed
14
File operation failed
15
FCoE operation failed
16
.