Replacing the optical drive, Procedure, Postrequisites – Dell Inspiron 14R SE (7420, Mid 2012) User Manual

Page 43

Advertising
background image

Replacing the Optical Drive |

43

16

Replacing the Optical Drive

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the R
egulatory
Compliance Homepage at dell.com/regulatory_compliance.

Procedure

1

Align the screw holes on the optical-drive bracket with the screw holes on the
optical drive.

2

Replace the screws that secure the optical-drive bracket to the optical drive.

3

Align the tabs on the optical-drive bezel with the slots on the optical-drive
assembly and snap the optical-drive bezel into place.

4

Slide the optical-drive assembly into the optical-drive bay until it is fully seated.

5

Replace the screw that secures the optical-drive assembly to the computer base.

Postrequisites

1

Replace the base cover. See "Replacing the Base Cover" on page 29.

2

Replace the battery. See "Replacing the Battery" on page 19.

3

Follow the instructions in "After Working Inside Your Computer" on page 11.

book.book Page 43 Wednesday, April 11, 2012 4:13 PM

Advertising