Dell Inspiron 14R SE (7420, Mid 2012) - Manual (Page 75)

Replacing the Display Assembly | 75
30 Replacing the Display Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1 Place the display assembly in position and replace the screws that secure the
display assembly to the computer base.
2 Connect the antenna cables to the connectors on the Mini-Card.
3 Close the display and turn the computer over.
4 Replace the screws that secure the display assembly to the computer base.
Postrequisites
5 Replace the palm rest. See "Replacing the Palm Rest" on page 49.
6 Replace the keyboard. See "Replacing the Keyboard" on page 25.
7 Replace the base cover. See "Replacing the Base Cover" on page 29.
8 Replace the battery. See "Replacing the Battery" on page 19.
9 Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 75 Wednesday, April 11, 2012 4:13 PM