Replacing the camera module, Procedure, Postrequisites – Dell Inspiron 14R SE (7420, Mid 2012) User Manual

Page 93

Advertising
background image

Replacing the Camera Module |

93

38

Replacing the Camera Module

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the R
egulatory
Compliance Homepage at dell.com/regulatory_compliance.

Procedure

1

Connect the camera cable to the connector on the camera module and secure it
with the tape.

2

Use the alignment posts on the display cover to place the camera module in
position and adhere the camera module to the display cover.

Postrequisites

1

Replace the display panel. See "Replacing the Display Panel" on page 83

1

Replace the display bezel. See "Replacing the Display Bezel" on page 79.

2

Replace the display assembly. See "Replacing the Display Assembly" on page 75.

3

Replace the battery. See "Replacing the Battery" on page 19.

4

Replace the palm rest. See "Replacing the Palm Rest" on page 49.

5

Replace the keyboard. See "Replacing the Keyboard" on page 25.

6

Replace the base cover. See "Replacing the Base Cover" on page 29.

7

Replace the battery. See "Replacing the Battery" on page 19.

8

Follow the instructions in "After Working Inside Your Computer" on page 11.

book.book Page 93 Wednesday, April 11, 2012 4:13 PM

Advertising