Chaparral VFS113 User Manual
Page 39
Configuring the Router
3-11
If you selected LOOP, the Loop ID screen displays. To display the Router LUN
screen, press Enter. If you want to change the Loop ID, you can do so. See
the Router’s Loop ID on page 3-8
If you selected POINT-TO-POINT, the Router LUN screen displays.
The text inside the parentheses ( ) shows the current Router LUN setting.
4
Select the option or number you want to use and press Enter.
The system confirms that you want to make the change.
5
Select Yes and press Enter to make the changes.
The system confirms that the changes are made.
6
Press Enter to return to the Configuration Menu.
7
Reboot the router.
8
If you entered a specific LUN, repeat steps 1 through 3 to see if the current router
LUN, inside the parentheses ( ), is what you entered.
9
If the LUN is not what you want, repeat steps 4 through 7.
To
Do this
Let the router determine the its LUN
each time the it powers up
■
Select SOFT and press Enter.
This is the default setting.
Keep the same LUN for the router at
all times
■
Select the [LUN] you want to use
and press Enter.
This can be any number from 00 to 63.
Not assign the router an FC LUN
■
Select NONE and press Enter.
Note: If you change the topology, Loop ID, or router LUN, you must
reboot the router for the change to take effect. See