Chaparral VFS113 - Manual (Page 91)

Index
I-3
displaying FC-to-SCSI address map 23
FC-to-SCSI addresses 1
Loop ID to AL_PA 3
mapping mode
AUTO setting 20
changing 20
FIXED setting 20
Mapping Mode screen 21
N
navigating in the Router Administrator software 5
network
setting up to access controller software 3, 1
Network Management System Console
SNMP Configuration screen 6
System Configuration screen 4
TCP/IP Configuration screen 5
Network Management System Console screen 6, 7
NONE setting 10
P
packing list 1
POINT-TO-POINT topology setting 7
POST, table of failures and solutions 2
powering down
devices 10
the router 10
powering up
devices 10
the router 10
Problem 5
problems
during bootup 1
router not responding 6
with COM port 4
with device SCSI channel 5
with terminal emulator 4
with terminal screen 4, 5
R
rack, installing the router in 3
rebooting
problems during 1
the router 19
replacing the fuse 6
resolving
IP addresses using ARP 2
IP addresses using DHCP 3
restarting the router 19
Restore Defaults screen 19
restoring router configurations 3
restoring the default settings 18
router
benefits 2
changing the date 14
changing the initiator ID 12
changing the Loop ID 8
changing the LUN 10
changing the scan delay 15
changing the SCSI ID 12
changing the time 14
configurations restoring 3
configuring 1
configuring TCP/IP 1
connecting to the Ethernet port 10
connecting to the FC port 8
connecting to the RS-232 port 9
connecting to the SCSI channels 7
default settings 12
disabling the alarm 16
disabling the termination 13
displaying configuration information 27
displaying devices connected to 23
displaying events 24
displaying hardware information 27
displaying its FC LUN 30
enabling the alarm 16
features 2
installing 1
installing in a rack 3
installing on a desktop or table 2
making the data connections 7
mapping of addresses 1
rebooting 19
restoring default settings 18
selecting the topology 7
specifications 4
unpacking 1
upgrading firmware 31
Router Administrator 7