Chaparral VFS113 - Manual (Page 90)

VFS113 Rack/Desktop Model User’s Guide
I-2
displaying 23
configuration information 27
devices 23
events 24
hardware information 27
E
enabling, the router’s alarm 16
Ethernet card
upgrading firmware 33
Ethernet port
accessing the Disk Array Administrator software 3, 1
connecting to 10
Event Log Menu 25
Event Log screen 26
event log, displaying 24
events, displaying 24
Extended Copy 3
F
FC light 11
FC LUNs
changing for devices 21
changing mapping mode 20
displaying for router 30
FC port, connecting to 8
FC-to-SCSI address map 23
firmware
upgrading the Ethernet card 33
firmware, upgrading 31
FIXED setting 20
Flash Utility
restoring router configurations 3
Flash Utility screen 32
FS1310
mapping of addresses 1
FT light 11
fuse, replacing 6
G
GBICs, compatible types of 8
H
Hardware Information screen 28, 8
hardware information, displaying 27
Host Configuration screen 7
HVD model 8
I
initial Disk Array Administrator screen 4
initial Router Administrator screen 2
initiator ID, changing for router 12
installing
example configurations of 4
in a rack 3
on a desktop or table 2
the router 1
IP addresses
resolving using ARP 2
resolving using DHCP 3
L
LAN, setting up to access controller software 3, 1
LED lights 11
LED status lights 11
lights 11
Loop ID
changing for router 8
settings for 8
SOFT setting 8
Loop ID screen 9
Loop ID to AL_PA mapping 3
LOOP topology setting 7
LUNs
changing for devices 21
changing for router 10
displaying for router 30
NONE setting 10
settings for 10
SOFT setting 10
LVD model 8
M
MAC hardware address 2
map