Chaparral VFS113 - Manual (Page 80)

VFS113 Rack/Desktop Model User’s Guide
D-6
Table D-2 describes the settings you can change here.
SNMP Configuration Screen
Option 3 from the Network Management System Console screen displays the SNMP
Configuration screen.
Table D-3 describes the settings you can change here.
Table D-2. System Configuration screen settings
Option Setting Description
1 IP Address Internet Protocol address of the router. Default is 10.0.0.1.
2 IP Mask Subnet mask. Default is 255.255.255.0.
3 Gateway Default is 0.0.0.0. See your network administrator for more
information.
4 DHCP Enabled? Yes or No toggle that enables or disables DHCP. Default is No
(disabled).
ESC Exit Saves all changes and returns to the Network Management
System Console screen
Note: Before choosing to enable DHCP, contact your network
administrator and make sure you have support for identifying IP hardware
and name server addresses.
Table D-3. System Configuration screen settings
Option Setting Description
1 SNMP Trap Host Host computer’s IP address that is set up to receive SNMP
traps. Default is 0.0.0.0.
2 SNMP Traps
Enabled? On or off toggle to enable SNMP traps. Default is No
(disabled).
3 Read Community SNMP read password. Default is Public.