Dell OptiPlex 380 (Late 2009) - Manual (Page 18)

Back to Contents Page
Heat Sink
Dell™ OptiPlex™ 380 Service Manual– Mini-Tower
Removing the Heat Sink
1. Follow the procedures in Before Working Inside Your Computer .
2. Loosen the two captive screws that secure the heat sink to the system board.
3. Pivot the heat sink towards the back of the computer and remove it from the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.