Dell OptiPlex 380 (Late 2009) - Manual (Page 28)

Back to Contents Page
Optical Drive
Dell™ OptiPlex™ 380 Service Manual— Mini-Tower
Removing the Optical Drive
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the drive bezel .
3. Disconnect the power cable from the optical drive.
4. Disconnect the SATA cable from the optical drive.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com to view the following illustrations.