I/o panel, Removing the i/o panel – Dell OptiPlex 380 (Late 2009) User Manual
Page 20
Advertising
Back to Contents Page
I/O Panel
Dell™ OptiPlex™ 380 Service Manual—
Mini-Tower
Removing the I/O Panel
1.
Follow the procedures in
Before Working Inside Your Computer.
2.
Disconnect the I/O panel data cable from the system board.
3.
Remove the I/O data cable from the cable routing clip.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Advertising