Installing the system fan, Removing the heat sink – Dell Vostro 5460 (Late 2012) User Manual
Page 14
5.
Lift and remove the left system fan from the computer.
6.
Disconnect the right system fan cable from its connector on the system board.
7.
Peel away the system board flex cable from the right system fan.
8.
Remove the screws that secure the right system fan to the system board.
9.
Lift and remove the right system fan from the computer.
Installing the System Fan
1.
Place the right system fan into its original position in the system board and affix the system board flex cable.
2.
Tighten the screws that secure the right system fan to the system board.
3.
Connect the right system fan cable to its connector on the system board.
4.
Place the left system fan into its original position in the system board.
5.
Tighten the screws that secure the left system fan to the system board.
6.
Connect the left system fan cable to its connector on the system board.
7.
Install :
a) battery
b) base cover
8.
Follow the procedures in
After Working Inside Your Computer.
Removing the Heat Sink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove :
a) base cover
b) battery
c) system fan
3.
Remove the screws that secure the heat sink to the system board.
4.
Lift and remove the heat sink from the computer.
14