Dell Vostro 5460 (Late 2012) - Manual (Page 30)

SATA Operation Change the SATA controller mode to
either ATA or AHCI.
Default: AHCI
Function Key Behavior Specifies the behavior of the function
key <Fn> .
Default: Function key
Audience ASR Assist Enable or disable the Audience ASR
Assist feature.
Default: Enabled
Miscellaneous Devices These fields let you enable or disable
various on-board devices.
Security
Table 4. Security
Set Asset Tag This field displays your system's asset tag. If the asset tag
is not already set, this field can be used to enter it.
Set Admin Password Allows you to change or delete the administrator
password.
Set System Password Allows you to change or delete the system password.
Set HDD Password Allows you to set a password on the computer's internal
hard drive (HDD).
Password Change Allows you to change the security password.
Password Bypass Allows you to bypass the system password and the
internal HDD password prompts during a system restart/
resume from hibernate state.
Computrace Enable or disable the Computrace feature on your
computer.
Boot
Table 5. Boot
Boot Priority Order Specifies the order of different devices in which the
computer will boot through at start up.
Windows Boot Manager Allows windows to search for a hard drive with windows
files and boot from it.
Network Boot Specifies which network device the computer can boot
through.
Secure Boot Species if the UEFI secure boot option is enabled or
disabled.
Add Boot Option Allows the user to add an additional boot device.
Delete Boot Option Allows the user to remove an existing boot device from
the boot order.
Exit
This section allows you to save, discard, and load default settings before exiting from System Setup.
30