Dell PowerVault DL2200 CommVault - Manual (Page 133)

Troubleshooting Your System
133
• vFlash media cards
• USB memory keys
• NIC hardware key
• Expansion-card riser
• Integrated storage controller card
• iDRAC6 Express card
• iDRAC6 Enterprise card
• Power supplies
• Fans
• Processors and heat sinks
• Memory modules
4 Let the system dry thoroughly for at least 24 hours.
5 Reinstall the components you removed in step 3.
6 Close the system. See "Closing the System" on page 65.
7 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the system does not start properly, see "Getting Help" on page 157.
8 If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 90.
9 Run the appropriate online diagnostic test. See "Using Online Diagnostics"
on page 147.
If the tests fail, see "Getting Help" on page 157.
book.book Page 133 Wednesday, May 12, 2010 9:26 PM