Dell PowerVault DL2200 CommVault - Manual (Page 57)

Using the System Setup Program and UEFI Boot Manager
57
Embedded System Management
The Lifecycle Controller is an embedded utility that enables systems
management tasks from an embedded environment throughout the server’s
lifecycle.
The controller can be started during the boot sequence and can function
independently of the operating system.
NOTE:
Certain platform configurations may not support the full set of features
provided by the controller.
The following features of the Lifecycle Controller are supported on systems
with Baseboard Management Controller (BMC):
• Installing an operating system
• Running diagnostics to validate the memory, I/O devices, processors,
physical disks, and other peripherals
When an optional iDRAC6 Express card is installed, the controller provides
the following additional features:
• Downloading and applying firmware updates
• Configuring hardware and firmware
For more information about setting up the controller, configuring hardware
and firmware, and deploying the operating system, see the
Lifecycle Controller
User Guide on the Dell Support website at support.dell.com/manuals.
Baseboard Management Controller Configuration
NOTE:
If an iDRAC6 Express card is installed on the system, the Baseboard
Management Controller (BMC) utility is replaced by the iDRAC6 utility.
The BMC enables configuring, monitoring, and recovery of systems remotely.
BMC provides the following features:
• Uses the system’s integrated NIC
• Enables fault logging and SNMP alerting
• Provides access to system event log and sensor status
• Allows control of system functions including power on and off
• Functions independently of the system’s power state or the system’s
operating system
book.book Page 57 Wednesday, May 12, 2010 9:26 PM